Rodekassen - KMC MUSIK

Go to content

Main menu:

Rodekassen

Mandolin m.m.
AKG C410/B Condenser Microphone

AKG C410/B Condenser Microphone

DEMO AKG C410/B Condenser Microphone with AKG B9 Battery Powe Supply

1,495.00 kr Add
Bon Ruller til Teleterminal

Bon Ruller til Teleterminal

Bon Ruller til Teleterminal
med kvittering til kunde
17 stk. Ruller

50.00 kr Add
Boss MAH-1

Boss MAH-1

Boss MAH-1

Micro Monitor Amp Holder
2 stk.

290.00 kr Add
Carl Martin Classic Chorus

Carl Martin Classic Chorus

Carl Martin Classic Chorus

Vejl.Udsalg kr.895,00

The Classic Chorus by Carl Martin, is not just another chorus pedal. Yes it can be powered by either a 9V battery or a regulated 9V power supply; yes it has the solid diecast housing with the cool off-white chicken-head knobs and the cool CM graphics; yes it has that great CM quality bypass switching, and the LED’s to indicate operation; and yes when you plug into this pedal, you will get a chorus effect…..but….there is so much more! Carl spent a year researching and developing this pedal for the vintage guitar nut in all of us. Plug into the Classic Chorus, step on the Bypass switch to turn the effect on, adjust the speed and depth knobs to obtain your favorite chorus effect and then bring up the level to show off just how good you sound. You will be amazed at how this pedal takes you back to the ‘day’ with it’s full, round, vintage chorus sound. Now hang on to your hat and step on the Vibrato switch. By adjusting the Rate knob clockwise you change your sound from Chorus to Vibrato with the full Vibrato effect achieved with the Rate and Depth knobs turned completely clockwise. (The Speed Depth and Level knobs are universal for both Chorus and Vibrato.) You will notice a distinct drop in your highs, but Carl says this is intentional….it will keep your sound warmer and rounder, plus, when you use this effect with Distortion/Overdrives it won’t fizz out or die, you will just get that massive overdriven chorus/vibrato effect that you always dreamed of.

695.00 kr Add
Carl Martin Crush Zone

Carl Martin Crush Zone

Carl Martin Crush Zone

Vejl.Udsalg kr.695,00

A vintage style, high-gain/distortion pedal using the same high quality components as its' Carl Martin cousins, the 'Crush Zone' provides everything from a slight edge to your tone, to mind-blowing distortion. Adjust the cool chicken-head knobs for level and distortion, and then refine your sound using the tone control. Crush Zone is housed in heavy die cast case with 9 volt battery compartment and heavy-duty bypass switching.

595.00 kr Add
Carl Martin Red Repeat

Carl Martin Red Repeat

Carl Martin Red Repeat

Vejl.Udsalg kr. 895,00

Based on the infamous Carl Martin Delayla, the 'Red Repeat' provides an affordable 600 milliseconds of delay as well as a simply controlled echo. Add just a touch of delay to thicken your sound, or push the repeat circuit past 12o'clock where the unit begins to self-oscillate, just like an old analog delay. Great vintage style and colour in a heavy diecast, 9 volt pedal with heavy duty bypass switching.

695.00 kr Add
Cioks DC10 Supply

Cioks DC10 Supply

DC10 is a member of CIOKS professional range of dedicated multi-output power supplies for effect pedals. It has 10 regulated and well filtered DC outlets configured in 8 isolated sections. With a total of 1.600mA it's a perfect solution for bigger rigs with pedals only using a DC power source. Its three powerful sections with 400mA each will power pedals with special requirements like those from TC Electronic Nova series, Eventide Factor series, MoogerFoogers, Radial Tonebone or others without the need of custom cables. Selectable with a switch DC10 offers voltages 9, 12 and 15V DC, and combined with one of the included Stack Flex also 18 and 24V DC. The first 4 isolated outlets offering 4x100mA are ideal for standard 9V battery operated pedals Features: - 10 outlets configured in 8 isolated sections - toroidal transformer with additional magnetic field shielding - 3 powerful DC sections with 400mA each - 15V option for Radial Tonebone pedals - short circuit protection of all outlets - advanced LED monitoring of each section - temperature monitoring - 120 or 230V mains voltage operation - detachable mains power cord - a total of 16 Flex cables included

1,599.00 kr Add
Digitech Studio Quad

Digitech Studio Quad

Digitech Studio Quad

A/D Converter: 18 bit, 128 x oversampled delta-sigma stereo
D/A Converter: 20 bit 64 x oversampled
Sampling Frequency: 44.1 kHz

Dimensions: 19"
(482 mm) W x 1.75" (44 mm) H x 5.5" (140 mm) D

Net Weight: 5.5 lbs (2.5 kg.)

Memory Capacity:
Factory: 100 Programs
User: 100 Programs

Output Section:
Connector: 1/4" TS Plug Unbalanced
Nominal Level: -10dBV, +4 dBu switchable
Maximum Level: +18 dBu
Impedance: 470 Ohm

Input Section:
Connector: 1/4" TS Plug Unbalanced
Nominal Level: -10 dBV, +4 dBu, software variable
Maximum Level: +18 dBu
Impedance: 10 K Ohm

DSP Section:
Static-Dynamic Instruction Set computer(S-DISC®)
Digital Signal Path Width: 24 bits (144.5 dB)
Internal Data Path Width: 48 bits (289 dB)
Dynamic Delay Memory: 64k x 20 bits (1.4 seconds)
Static Delay Memory: 256 24-bit registers (5.8 milliseconds)
Data ALU Processing: 11.3 MIPS
Address ALU Processing: 16.9 MIPS
Multiplier Size: 24 bits x 24 bits

1,000.00 kr Add
ECHO 24.96 Audio Interface

ECHO 24.96 Audio Interface

Echo MIAMIDI PCI 4x4 Audio Interface 24-bit 96kHz
Balanced i/o Coax S/PDIF MIDI

Type: AUDIO INTERFACE

Model: MIAMIDI

Metal: Silver

MPN: MIAMIDI

Gi et BUD!

500.00 kr Add
Genesis1

Genesis1

Genesis1 udgået model
A/D/A 24 bit
Sampling Rate 44.1 kHz
Power Consumption 10 watts
Dimensions Width 10.5" x Depth 6.6" x Height 2.25"
Unit Weight 1.1 lbs.

500.00 kr Add
Ibanez DE7 Delay/Echo

Ibanez DE7 Delay/Echo

Ibanez DE7 Tone Lok Delay Echo Pedal

Time, Repeat, and Level knobs.

Vejl.Udsalg kr.1.150,00

920.00 kr Add
K&M 18865 Arm-Set

K&M 18865 Arm-Set

K&M 18865 Arm-Set A, black, the length can be changed, for Spider Pro

650.00 kr Add
Lexicon MPX 500

Lexicon MPX 500

Lexicon MPX 500

Audio Inputs
Connectors: XLR/TRS balanced
Level: +20 to +8dBu full scale
Impedance: 50K bal.; 25K unbal.
A/D: 24-Bit Sigma Delta,
20Hz-20kHz ±1dB
Crosstalk: -96dB @1kHz
A/D Dynamic Range: 105dB, typical

Analog Audio Outputs
Connectors: XLR/TRS balanced
Level: +26dBu balanced;
+20dBu unbal.
Impedance: <600Ω
D/A: 24-Bit Delta Sigma;
20Hz-20kHz ±1dB
Crosstalk: -96dB @1kHz
D/A Dynamic Range: 101dB, typical

Digital Audio I/O
Connectors: Coaxial RCA;
S/PDIF (IEC-958, CP-340)

System Sample Rates
Internal Clock and S/PDIF Input:
44.1, 48kHz

Display
150 x 32 LCD, Backlit

Footswitch
Tip/Ring/Sleeve phone jack for
Bypass and Tap (optional)

MIDI Interface
Connectors: IN, OUT/THRU

Dimensions
19"Wx 1.75"H x 5.5"D
(483x45x140.25mm)

Weight
3 lbs (1.4kg)

3,500.00 kr Add
Line6 Constrictor

Line6 Constrictor

Line6 Constrictor

Vejl.Udsalg kr. 1.095,00

Compressor Dynamics Model Switch - This switch reconfigures the virtual circuitry inside Constrictor to give you three distinctly different ?flavors?: Compact - Is based on vintage stompbox compressors from the `70s and gives you a slight mid frequency boost. The virtual circuitry of the Constrictor is automagically reconfigured to run a 37:1 compression ratio, 10ms fast attack & 295ms slow release time when this model is run.

Squeeze - Gives you `80s stompbox-style compression with a pleasant treble boost. It runs a 19:1 compression ratio, 31ms slow attack & 98ms fast release time.

Mellow - Model is the place to be when you?re in the mood for a classic tube compressor sound, with a nice, flat frequency response. it's got 3:1 compression ratio, 10ms fast attack & 82ms fast release time. Level - This sets the output level. Higher levels will hit the amp or effect fed by the Constrictor with more signal level, giving your more volume.

Gate - With this knob at minimum (fully counter-clockwise) the noise gate is off. Turn up a bit to low settings, and the gate should be appropriate. Use high settings when there?s more noise to tame, or you want to aggressively clamp to silence at the end of notes or chords.

Sustain - Set this at minimum to even out the difference between your loud and quiet playing a bit, without changing sustain too much. Or max it out to bring pretty much everything to the same level, with super sustain.


795.00 kr Add
Line6 Crunchtone

Line6 Crunchtone

Line6 Crunchtone

Vejl.Udsalg kr.1.050,00

Model Switch - Switching this instantly reconfigures Crunchtone. You get three of the juiciest overdrive sounds this side of Tejas! Blues - Designed to produce a glassy, snappy 6L6-style overdrive tone for playing the blues.

Pop - Just the thing when you need a nice, 60?s-style Class-A pop/rock bark.

Crunch - Gives a punchy, slightly compressed overdrive tone, much like what you'd get from a British-style full stack amp-and-cab setup.
Gate - Switching this instantly reconfigures Crunchtone. You get three of the juiciest overdrive sounds this side of Tejas! Off - Disables the Gate.

Gate 1 - A soft and mild noise gate, self-adjusting to your current Drive knob setting (cool, huh?).

Gate 2 - A heavy, fast-clamping gate. Great for those aggressive metal chords and palm muting. Level - This sets the output level. Crunchtone has plenty of output to spare, so if you crank the Level knob, you can score some extra overdrive from the amp your feeding it to.

Bass - Add more lows to your sound by turning this knob up, or reduce it by turning the knob down. Point the knob straight up to leave your tone unaltered.

Treble - Just like the Bass knob, only it's working the highs.

Drive - The Drive knob controls the amount of distortion created within your Crunchtone.

795.00 kr Add
Line6 Space Chorus

Line6 Space Chorus

Line6 Space Chorus

Vejl.Udsalg kr.1.195,00

Model Switch - Give this a flick to reconfigure the virtual circuitry inside Space Chorus, and enjoy three distinctly different "flavors." Chorus - This model lets you get tones in the style of both vintage and modern analog chorus units with "bucket brigade" electronics. Feed it a mono in, and you'll get chorused sound on the left, and unprocessed "dry" sound on the right. Feed it stereo, and you'll get processed sound to both left and right outputs.

Tri - Get thick, richly modulated tone from this model based on the legendary multi-voiced chorus unit that's a treasured "secret weapon" in many great studios.

Vibrato - This model gives a warbling pitch variation to your sound, in the style of no-dry-mix vibrato units. Speed - Adjusts the effect sound from a slow sweep to a speedy warble.

Depth - Dial in the amount of effect, from subtle to dramatic.

Color - The Color knob simultaneously adjusts many behind the scenes details of the sounds and works differently for each model: •With the Chorus model, the Color knob lets you go from vintage analog tones (knob pointing left) to more modern chorus sounds (knob pointing right).
•For the Tri model, color gives you a choice from warm and mellow sound to shimmering and bright.
•For Vibrato, color works more like a three-way switch for Vintage, Blue and Euro style sounds as shown.

Tap Tempo - Get your swirling chorus groove on! Using the innovative ToneCore® double-action footswitch, you can tap a couple times and have the pulsations match your tempo. Whether the effect is active or bypassed, you can tap the footswitch lightly to set your tempo. Your first two taps establish the tempo and any additional taps will be averaged in.

Any time the Tap Tempo switch is used, the tapped value overrides the current setting. Whenever the knob is turned, it overrides the last value entered with the Tap Tempo switch. Space Chorus? indicator light flashes the tempo in green when the effect is ON and amber when the effect is OFF.


895.00 kr Add
Line6 Über Metal

Line6 Über Metal

Line6 Über Metal

Vejl.Udsalg kr.1.050,00

Model Switch - Give this a flick to reconfigure the destructive power of Über Metal. Metal - creates screaming distortion, from heavy grind to molten metal! Bow down, infidels.

Pulverize - gives you a distortion similar to a high-gain tube amp. Mmmm, it's warm and meaty!

Insane - has more skin-peeling gain and sustain than anything else available. For the inner Samurai-shredder in all of us. Level - This sets the output level. Higher levels will hit the amp or effect fed by the Über Metal will more signal level, giving your more volume.

Mid & Scoop - Mid chooses a frequency from 250Hz to 4kHz. Scoop then removes sound at this frequency, with maximum scoop at the fully clockwise setting. Turn it fully counter-clockwise for a slight mid boost.

Drive - This controls the amount of distortion created within your Über Metal. Especially when you've got it set high, you may need to use the Gate to tame unwanted noise.

Bass & Treble - Bass and Treble are controls for your low and high frequencies.

Gate Off - Disables the Gate.

Gate 1 - A soft and mild noise gate, self-adjusting to your current Drive knob setting.

Gate 2 - A heavy, fast-clamping gate. Great for those aggressive metal chords and palm muting.

795.00 kr Add
Marshall ED1

Marshall ED1

Marshall ED1

Vejl.Udsalg kr.795,00

Power: 9V DC Centre Negative Regulated

Minimum Current Draw: 80mA

Controls: Mode, Reverb Time, Damping, Level

Switches: On/Off Switch

Indicators: On/Off LED

Jacks: 2 Input, 2 Output 'Jack sockets'

Input Impedance: 1M Ω

Output Load Impedance: < 1k Ω

Dimensions: 120mm x 65mm x 55mm

Weight: 510 grammes







499.00 kr Add
Marshall VT1

Marshall VT1

Marshall VT1

Vejl.Udsalg kr.895,00

Marshall VT1 Vibratrem
Effektpedal

499.00 kr Add
Maya 44 PCI Audio Interface

Maya 44 PCI Audio Interface

Maya 44
Esi
PCI Audio Interface
4 in - 4 Out

400.00 kr Add
Midiman Portman

Midiman Portman

Midiman Portman Midi Interface
2 in - 4 out
PC Parallel Midi Interface

500.00 kr Add
Peavey Versamount 70

Peavey Versamount 70

Peavey Versamount 70
Wall Mount
2 Stk.

VM 70s allow for mounting the Impulse 12D speaker cabinet from the bottom mounting flange
Supports up to 70 lbs.
Designed as a ceiling or wall-mount bracket
Weight Packed: 7.00 lb(3.175 kg)
Width Packed: 6.25"(15.875 cm)
Height Packed: 16"(40.64 cm)
Depth Packed: 4.75"(12.065 cm)

500.00 kr Add
Quik Lok QL30

Quik Lok QL30

Quik Lok QL 30
Speaker Walmount set 2 Piece

Speaker Wall Mount with 2-Hole SPeaker Plate and 2-Hole Wall Plate.

Front to back depth: 4.75" - 12 cm
Weight capacity: 30 lb - 14 kg
Weight: 1.1 lb - 0.5 kg

400.00 kr Add
Rocktron XDC

Rocktron XDC

Rocktron XDC Brugt!
Distortion/Exciter
The switches/knobs include (from left to right): Power, Gain, Brilliance, Level, in/out switch, Exciter 1 Phase, Exciter 1 Mix, Exciter 2 Phase, Exciter 2 Mix, and Output.
There are 3 jacks in the back. Output, Input, and Footswitch.

1,000.00 kr Add
SampleTank L2 Plugin

SampleTank L2 Plugin

SampleTank L2 Plugin
Works as a standalone application as well as a plug-in in Mac OS (Universal Binary), and Windows (XP/Vista).
Supported plug-in formats: VST, RTAS, and AU.
Imports WAV, AIFF, SDII, AKAI S-1000/3000 and SAMPLECELL directly from the plug-in.
16 part multitimbral sound module with layerable parts.
3 synth engines: newly enhanced STRETCH™ and Pitch-Shift/Time-Stretch (PS/TS) plus traditional Resampling.
Powerful Multi-Effects section that includes 5 effects per Part, 5 Send and 5 Master effects.
33 built-in DSP effects.
Part and Master Loop Sync.
Independent Part and Master Volume/Pan controls.
1 DVDs of sounds, 2 GB of samples and more than 900 patches included.

System Requirements:

Power PC based Macintosh®
Minimal: 866 MHz G4 processor, 512 MB of RAM,
Mac OS X 10.4 or later.
Suggested: dual 1.25 GHz G4 or G5 processor, 1 GB of RAM, Mac OS X 10.4 or later.
Supported Plug-in formats: AU, VST, RTAS.
SampleTank 2 RTAS requires Pro Tools 7.0 or later.

Intel based Macintosh®
Minimal: 1.5 GHz Intel Core Solo processor, 512 MB of RAM, Mac OS X 10.4.4 or later.
Suggested: 1.66 GHz Intel Core Duo processor, 1 GB of RAM, Mac OS X 10.4.4 or later.
Supported Plug-in formats: AU, VST, RTAS.

Windows®
Minimal: Pentium 1GHz / Athlon XP 1.33 GHz, 512 MB of RAM, Windows XP / Vista or later.
Suggested: Pentium 2.4 GHz / Athlon XP 2.4 GHz, 1 GB of RAM, Windows XP / Vista or later.
Supported Plug-in formats: VST, RTAS.
SampleTank 2 RTAS requires Pro Tools 7.0 or later.

400.00 kr Add
SM Pro Audio DI-Dock

SM Pro Audio DI-Dock

SM Pro Audio DI-Dock

Apple iPod*/iPhone (2/3G/3GS/4/4S)* compatible docking connector
3.5mm line input connector
Headphone output and rotary level control
Transformer isolated outputs
Individual channel GND lift switches

Rugged metal construction
Powered by phantom power or 12v external adaptor
"charge" mode for Apple iPod*/iPhone (2/3G/3GS/4/4S)*
available in black or white

599.00 kr Add
Sort Lysstativ i aluminium exclusive T-bar

Sort Lysstativ i aluminium exclusive T-bar

Sort Lysstativ i aluminium exclusive T-bar

Højde: min. 145cm, max. 322cm.
Max last: 25kg.
Vægt: 5kg.

500.00 kr Add
Zoom B2

Zoom B2

Zoom B2

Effect Types: 47
Effect Modules: 9
Maximum Simultaneous Effects: 9
Patch Memory: User 40+Preset 40, Total 80
Sampling Frequency: 96kHz
A/D Conversion: 24bit, 64times over-sampling
D/A Conversion: 24bit, 128times over-sampling
Input: 1/4" phone jack(Rated input level: -20dBm, Input impedance: 1MΩ)
Output(Line / headphones combined): 1/4" stereo phone jack(Maximum output level: +5dBm, Output load impedance: 10kΩ or higher)
Control Input: Expression pedal, Foot switch
Display: 2digit 7segment LED display, Parameter LED
Power Requirements: AA size(LR6)battery x 4, or AC adaptor DC9V/300mA/Center minus type(AD-0006 recommended)
Battery Life: 7.5hours(with alkaline batteries)
Dimensions: 156(W) x 162(D) x 65(H)mm
Weight: 700g(without batteries)
Optional Accessories: FP02(Expression pedal), FS01(Foot switch)

500.00 kr Add
 
Back to content | Back to main menu