Top / PA - KMC MUSIK

Go to content

Main menu:

Top / PA

Forstærkere / PA
Aguilar AG700 Bas forstærker top - ring for dagspris

Aguilar AG700 Bas forstærker top - ring for dagspris

Aguilar AG700 Bas forstærker top - ring for dagspris

The AG 700 has the clarity, dynamic range and fast transient response of the legendary AG 500 with a bigger low-end and high headroom. This solid state amplifier provides 700 continuous watts at 4 ohms while only weighing 4.9 lbs. (2.22 kg)!
Boasting an incredibly flexible EQ section, the AG 700 features controls for Treble, High Mid, Low Mid and Bass along with Deep and Bright EQ switches for a broadband boost. The AG 700 also features a series effects loop, XLR balanced output and two rear panel speakon outputs.

Streetprice: kr. 8.299,-

0.00 kr Add
Aguilar DB751 Top - ring for dagspris

Aguilar DB751 Top - ring for dagspris

Aguilar DB751 Top - ring for dagspris

Switchbar input for både passiv og aktiv elektronik

Effektloop, switchbar mellem seriel/parallel

Linjeudgang med XLR-tilslutning, switch for pre/post EQ og earthlift

Tuner output

2 stk. Neutrik Speakon output-jack

3 x 12AX7 preamprør

MOSFET-sluttrin med customdesignede transformatorer.

975W 2 ohm, 750W ohm, 400W 8ohm

43,2 x 35,6 x 13,3. 19kg

Inklusive rackhjørner (3 unit)

0.00 kr Add
Aguilar Tonehammer 350 -ring for dagspris

Aguilar Tonehammer 350 -ring for dagspris

Aguilar Tonehammer 350 - ring for dagspris

TONE HAMMER 350
Nu endnu mindre! Tone Hammer 350 vejer kun 1,3 kg,
men leverer alligevel hele 350W!
• Switchbar input for både passiv og aktiv elektronik
• Effektloop
• linjeudgang med XLR-tilslutning og earthlift
• Tuner output
• 2 stk. Neutrik Speakon output-jack
• 350W 4ohm, 175W 8ohm
• 21,0 x 19,0 x 7,0. 1,3kg.

0.00 kr Add
Aguilar Tonehammer 500 Top -ring for dagspris

Aguilar Tonehammer 500 Top -ring for dagspris

Aguilar Tonehammer 500 Top - ring for dagspris

Power Output: 500 watts into 4 ohms, 250 watts into 8 ohms

Preamp Section: Solid State

Power Section: Class D

Transformer: Switching mode power supply (SMPS)

EQ Section:
Bass: +/- 17 dB @ 40 Hz
Mid Level: +/- 16 dB
Mid Frequency: 180 Hz – 1 kHz
Treble: +/- 14 dB @ 4 kHz

Drive Control: Fully adjustable, featuring Aguilar’s proprietary AGS(adaptive gain shaping) circuit.


Effects Loop: Series operation. Adds 6 dB of additional gain, making it useful for a broad range of effects units.

Inputs: One 1/4" input jack, compatible with all active and passive basses

Speaker Outputs: Two Neutrik Speakon speaker outputs

Balanced Output: XLR balanced output with pre/post EQ and ground lift switch

Tuner output

Cooling: Two high quality whisper fans with thermal speed control

Dimensions: 10.75”W X 8.5”D X 2.75”H

Warranty: Three year limited

0.00 kr Add
Ampeg Classic SVT CL Bas Head rørforstærker 300W

Ampeg Classic SVT CL Bas Head rørforstærker 300W

Ampeg Classic SVT CL Bas Head rørforstærker 300W Brugt!

Preamp: Tube (2 x 12AX7)
Driver Tube(s): 1 x 12AX7, 2x 12AU7
Power Amp: Tube (6 x 6550)
RMS Power Output (2 Ohms): 300-Watts
RMS Power Output (4 Ohms): 300-Watts
Tone Controls: 3-Band
Mid Tone Control: 5-Position Selector
Ultra High/Low: Yes
Balanced Line Out: Yes
Preamp Out/Power Amp In: Yes
Slave Output: Yes

9,900.00 kr Add
Ampeg PF350 Top

Ampeg PF350 Top

Ampeg PF350 Top
RMS power output: 350W @ 4 ohms
Preamp: Solid-state
Power amp: Class D
Tone controls: Bass, mid, treble
Onboard limiter
Balanced direct out
FX loop
1/8” headphone out / line in
-15dB input pad
Power supply: switching
Dimensions ( H x W x D inches): 2 x 11 x 11
Handling weight: 8 lbs / 3.6 kg

2,695.00 kr Add
Ampeg SVT350 Top

Ampeg SVT350 Top

Ampeg SVT350 Brugt!

Vintage Ampeg tube sound
350W MOSFET output
Defeatable optocoupler limiter
Pre/post EQ XLR line out
Line out level select
Variable-speed fan
3-band EQ
9-band graphic EQ

2,900.00 kr Add
Crown XLS 402

Crown XLS 402

Crown XLS 402 Brugt!

Input Impedance (nominal)
(balanced,unbalanced) 20 kilohms, 10 kilohms
Load impedance:
Stereo Bridge 4-8 ohms
Mono 8 ohms
Stereo, 4 ohms (per ch.) 450W
Stereo, 8 ohms (per ch.) 300W
Bridge-Mono, 8 ohms 900W
11.7 kg

4,500.00 kr Add
EBS Classic 500 Bas forstærker

EBS Classic 500 Bas forstærker

EBS Classic 500 Bas forstærker

Type: 100% Solid State Amp
EQ section with dual mid controls Boosted drive control

Floating balanced XLR output

500 W output power into 2 ohms

Compact design, fits any ClassicLine cabinet - from the 112 to the 810.



Specs:
Input Impedance 1 Mohms
Gain range -oo / +28 dB
Character filter Shelving High/Low Pass
+6 db @ 75 Hz
-2.5 dB @ 800 Hz
+3 dB @ 9 kHz
Tone Controls
Bass Shelving +/- 15 dB @ 100 Hz
Low Mid Sweepable 150-900 Hz +/-15dB, Q=0.9
High Mid Sweepable 1.2-7 kHz +/-15dB, Q=1.1
Treble Shelving +/- 15 dB @ 10 kHz
Drive Section Gain 0-30 dB, Low end compensation
Other Features
Balanced Output,
Line Out
Minimum speaker impedance 2 ohms
Output Power
500 W RMS @ 2 ohms load
440 W RMS @ 4 ohms load
Dimensions (W x D x H) 19.3" x 11.8" x 8.5" (49cm x 30cm x 21,5cm)
Weight 14 kg / 31 lbs

8,400.00 kr Add
EBS FAFNER TD600 Bas Top NY PRIS!

EBS FAFNER TD600 Bas Top NY PRIS!

EBS FAFNER TD600 Bastop Brugt!
Serie nr.7002
EBS Fafner TD600 Bastop på 620 watt med rør-preamp, 3-bånds EQ med mid-sweep og compressor.
På fronten er følgende stik og kontroller. Input, Gain (med peak indikator), Compressor (med limit indikator), ByPass EQ (forstærkerens EQ trin), Bright, Bass, Low (Boost af lave frekvenser), Middle, Mid Freq., Treble, Hi (Boost af høje frekvenser), Drive, Character (Farver det forvrængede signal varmt) og Volume.
Balanceret output, med mulighed for Ground Lift og Post EQ.
På bagsiden af amp'en er der 2 stk. Speakon tilslutning til kabinetter, Effect Loop, Lineout og Tuner Out.
600W (360 W RMS @ 4 ohms, 500 W RMS @ 2 ohms, Dynamic Output Power 440 W RMS @ 4 ohms, 620 W RMS @ 2 ohms)
Dimensioner: H:20cm B:58cm D43,5cm.

5,900.00 kr Add
EBS HD350 Bas top

EBS HD350 Bas top

EBS HD350 Bas top

-100% Solid State Design
- Drive control
- Tube Emulated Drive Control
- Compressor/Limiter .
- Powerful 4-band EQ
- Serial and Parallel Effects loop
- Floating balanced XLR output
- Built-in speaker simulator
- 9 volt EBS Phantom Power System
- Active Intelligent cooling system

An ultracompact and light bass head loaded with useful features for the player who demands clout and versatility without fuss. Has superb dynamics and consistent quality throughout the entire frequency range, from the lowest sub-bass to the highest treble timbres. It's loaded with a compressor/limiter, powerful 4-band EQ,tube and speaker simulator, bright filter, an overdrive stage and a powerful accelerated 350W MOSFET power amp with a highly efficient cooling system. Other pro features: erial and parallel effects loop, floating balanced XLR output, speaker simulator, and 9V phantom power.

3,900.00 kr Add
EBS HD360 bas top

EBS HD360 bas top

EBS HD360 bas top

Type: 100% Solid State
Built-in Compressor/Limiter
Extremely Powerful 4-band EQ
Serial and Parallel Effects loop with mix-level control.
9 volt Phantom Power System™
Character filter.
Filter Remote Inputs.
Balanced XLR-Out with optional speaker simulator and ground lift.
Line and Tuner Out
Output Power: 360 W RMS @ 2 ohms

Specs:
Input Impedance 2 Mohms
Frequency Response 20 - 20.000 Hz
Maximum Compression Ratio (Compressor) 3:1
Tone Controls
Bass +/-15 dB @ 100 Hz
Middle +/- 12dB @ 50 - 3.000 Hz, Q=0.5
Treble +/- 15 dB @ 4 kHz
Bright -0/+20 dB @ 10 kHz
Drive Gain Range 0 - 30 dB
Drive Type Solid State
Speaker impedance 2 - 8 ohms
Continuous Output Power
Dynamic Output Power 360 W RMS @ 2 ohms,
Continuous Output Power 300 W RMS
Dimensions (W x D x H) 19" x 13" x 2U (48cm x 33cm x 8.9cm)
Weight 9 kg / 20 lbs

8,650.00 kr Add
EBS Reidmar 500 bas forstærker top

EBS Reidmar 500 bas forstærker top

EBS Reidmar 500 bas forstærker top

Type: Analog Preamp,
D-Class Power Amp
Built-in Compressor/Limiter
Extremely Powerful 4-band EQ
Effects loop
Character filter.
Balanced XLR-Out with Pre/Post EQ switch and Ground Lift.
Line and Headphones Out

Specs:
Input Impedance 2 Mohms
Gain Range -00 - +30 dB
Character Filter Shelving, High/Low Pass, +7 dB @ 40 Hz, -2 dB @ 800 Hz,
+3 dB @ 10 kHz
Tone Controls,
Bass Shelving +/-18 dB @ 60 Hz
Mid Bandpass Filter 100 – 6000 Hz +/- 12-15 dB
Treble Shelving +/-18 dB @ 6 kHz
Bright Shelving +15/-0 dB @ 10 kHz
Balanced Output -10 dBv, Pre/Post EQ, GND Lift
Output Power 250 W RMS / 470 W Dynamic Output @ 4 ohms load
Dimensions (WxDxH) 12.8 x 9.8 x 3.0” (32.5 x 25 x 7.5 cm)
Weight 3.1 kg (7.0 lbs.)

Output Power:
250 W RMS @ 4 ohms
470 W Dynamic Output

3,950.00 kr Add
EBS Reidmar 750 bas top

EBS Reidmar 750 bas top

EBS Reidmar 750 bas top

Type: Analog Preamp,
D-Class Power Amp
Built-in adjustable Compressor/Limiter
Extremely Powerful 4-band EQ
Drive Control
Effects loop
Character filter.
Balanced XLR-Out with Pre/Post EQ switch and Ground Lift.
Line and Headphones Out
Remote Output for connecting EBS RM-4 footswitch to control Character Filter, Drive, EQ bypass and Mute funtction
Output Power: 750 W @ 4 Ohms
120/230 V Switchable

Specs:
Input Impedance 1 Mohms / 100 pF
Gain Range -00 - +30 dB
Character Filter Shelving, High/Low Pass,
+7 dB @ 40 Hz, -2 dB @ 800 Hz,+3 dB @ 10 kHz
Tone Controls,
Bass Shelving +/-18 dB @ 60 Hz
Mid Bandpass Filter 100 – 6000 Hz +/- 12-15 dB
Treble Shelving +/-18 dB @ 6 kHz
Bright Shelving +15/-0 dB @ 10 kHz
Drive min/max 0/34 dB
Balanced Output -10 dBv, Pre/Post EQ, GND Lift
Remotes Output Remote Jack RING = Mute / TIP = Drive
Filter Jack RING = Filter Mode / TIP = Character
Output Power 700 W RMS @ 4 ohms load (350 W RMS @ 8 ohms)
Dimensions (WxDxH) 15.2 x 10.4 x 3.0” (38.5 x 26.5 x 7.5 cm)
Weight 3.7 kg (8.2 lbs.)

5,680.00 kr Add
EBS TD660 bas top

EBS TD660 bas top

EBS TD660 bas top

Type: Solid State/Tube Hybrid amp
Built-in adjustable Compressor/Limiter
Extremely Powerful 4-band EQ
Drive Control
Effects loop
Character filter.
Balanced XLR-Out with optional
speaker simulator and ground lift.
Line Out
Remote Output for connecting EBS RM-4 footswitch to control Character Filter, Drive, EQ bypass and Mute funtction
Output Power: 660 W @ 2 Ohms

Specs:
Input Impedance 1 Mohms
Frequency Response 35 - 20.000 Hz
Maximum Compression Ratio (Compressor) 3:1
Tone Controls
Bass +/-15 dB @ 100 Hz
Middle +/- 12dB @ 50 - 3.000 Hz, Q=0.5
Treble +/- 15 dB @ 6 kHz
Bright -0/+12 dB @ 10 kHz
Drive Gain Range 0 - 34 dB
Drive Type Solid State or Tube (ECC 83)
Speaker impedance 2 - 8 ohms
Continuous Output Power
Dynamic Output Power 660 W RMS @ 2 ohms,
Continuous Output Power 540 W RMS
Dimensions (W x D x H) 19" x 14" x 3U (48cm x 36cm x 13cm)
Weight 12 kg / 27 lbs

13,675.00 kr Add
Eden Terra Nova TN501, 500w bas forstærker

Eden Terra Nova TN501, 500w bas forstærker

Eden Terra Nova TN501, 500w bas forstærker

The TN501 is great for rehearsal and small bars as well as having a great DI out for when you need to use the front of house system. Getting great sounds from your amplifier is simple using the semi- parametric mid section and Eden's proprietary enhance EQ sweep.

500 Watt RMS amplifier section
High and Low instrument inputs
Enhance control
4-Band EQ circuit with semi parametric mid controls
Compressor with on/off control
Bass boost circuit
DI output w/level control, ground lift and pre/post selection
Headphone output & Aux In
Effects loop and tuner output
7,9cm x 32,4cm x 17,5cm
2,42 kg

4,495.00 kr Add
Fender Bassman 50 Watt - årg 1966

Fender Bassman 50 Watt - årg 1966

Fender Bassman 50 Watt - årg 1966
50 Watt

M/ Flightcase.

12,500.00 kr Add
Fender Showman Reverb TFL5000X.

Fender Showman Reverb TFL5000X.

Fender Showman Reverb TFL5000X.
100Watt
First Edition med Dual Reverb på begge Kanaler.

9,900.00 kr Add
Mackie FRS 1300 Power Amp

Mackie FRS 1300 Power Amp

Mackie FRS1300 Power Amp Brugt!
Mono / Stereo Modes
8 ohms per channel 235W
4 ohms per channel 420W
2 ohms per channel 650W
Bridge Mono Mode
8 ohms 840W
4 ohms 1300W

3,500.00 kr Add
Marshall head JCM 900 SL-X

Marshall head JCM 900 SL-X

Marshall head JCM 900 SL-X Brugt!
Model 2100 SL-X
Top
Årgang 1990-1992
100 Watts
Four EL34′s Three 12AX7′s
Effects Loop
Two independent volume controls (footswitchable)
Direct Out
Two speaker hookups
Switchable power ( 100/50 Watts)


7,900.00 kr Add
Marshall JFX 1  Preamp

Marshall JFX 1 Preamp

Marshall JFX 1 Brugt!
Preamp
19" Rack

2,900.00 kr Add
Marshall Super Lead 100 Plexi

Marshall Super Lead 100 Plexi

Marshall Super Lead 100 Plexi

Årgang: 1967 (Black)

49,900.00 kr Add
MesaBoogie Bass 400+ Top NY PRIS!

MesaBoogie Bass 400+ Top NY PRIS!

MesaBoogie Bass 400+ Brugt!
500 Watts
All Tube, Class A/B Power / 12x6L6, 4x12AX7
Two Inputs with Independent Pull Bright Volume Controls, (1=Active, 2=Passive)
Pull Shift Bass & Treble Controls (Standard Mid Control)
Assignable 7 Band Graphic EQ
Dual Patch Point FX Loop (Front & Back) w/Blend Control
600 Ohm XLR Balanced Out
Slave Out w/Level Control
3-Speed Fan Cooled (Off, Low & High)

12,900.00 kr Add
Orange AD200 bas top

Orange AD200 bas top

Orange AD200 bas top

200 Watt
Rør:
Power amp: 4 x 6550
Preamp: 1 x Ecc83/12ax7 and 1 x Ecc81/12at7

Højttaler Output:
1 x 8 Ohm cabinet connected to the 8 Ohm output
1 x 4 Ohm cabinet connected to one of the 4 Ohm outputs
2 x 8 Ohm cabinets each connected to one of the 4 Ohm outputs

Dimensioner: BxHxD : 55x27x28 cm
Vægt: 26,25kg

13,900.00 kr Add
Peavey Classic 60

Peavey Classic 60

Peavey Classic 60 Brugt!

Tube Power Amp
1x60w

4,000.00 kr Add
Peavey Pro Bass 500 NY PRIS!

Peavey Pro Bass 500 NY PRIS!

Peavey Pro Bass 500

500W into 2 ohms
350W @ 4 ohms
3-band parametric EQ
Tube preamp
XLR outs
Tuner send
Footswitchable mute
Speakon and 1/4" speaker outs
Post EQ effects loop with wet/dry mix

4,900.00 kr Add
QSC K10.2 Professionel aktiv højttaler 2000W

QSC K10.2 Professionel aktiv højttaler 2000W

QSC K10.2 Professionel aktiv højttaler 2000W

The QSC K.2 Series represents the best-in class loudspeaker for today’s demanding audio professionals. The perfect combination of elegant design, superior audio performance, high functionality, simple and intuitive operation, and genuine QSC reliability, K.2 delivers extraordinary results for users in both portable and installed applications.

- 2000 Watt Class-D amplifier module
- Factory Presets and savable/recallable scenes for commonly-used applications
- Multi-function digital display for control and selection of loudspeaker functions including cross-over, EQ, delay and frequency contour
- Intrinsic Correction™ tuning and loudspeaker management
- DMT™ (Directivity Matched Transition) design provides excellent power response and consistent performance across the listening area
- Refined, professional appearance looks great in any application
- Rugged ABS enclosure for long life and lasting durability
- Deployment in either main PA or floor monitor position
- Dual pole cup mounts (standard and 7.5 degree down-tilt)
- M10 fittings for flown applications
- Optional security panel prevents unauthorized tampering of controls
- Complete EASE and CAD information available online
- 6-Year Warranty with registration

Specs:
- Multi-purpose, 2-way powered loudspeaker
- LF Transducer: 10" (254 mm), cone
- HF Transducer: 1.4" (35.6 mm) titanium diaphragm compression driver
- Frequency Response (-6 dB): 56 Hz - 20 kHz
- Frequency Range (-10 dB): 50 Hz - 20 kHz
- Nominal Coverage Angle: 90° Axisymetric
- Maximum Rated SPL1: 130 dB @1 M peak, 122 dB @ 1 M continuous
- Amplifier: Class D
- Peak: 1800 W (LF), 225 W (HF)
- Cooling: Low-noise, variable speed fan
- Controls: Power, 3 x Level, Rotary encoder (push), 2 x selection buttons
- Monochrome LCD Display 1.75" x 1" (45 mm x 25.4 mm) Connectors:
- 2 x locking XLR/F ¼" combo (Mic/Line Input and Hi-Z/Line Input
- 1 x 3.5 mm TRS (Stereo Input)
- 2 x XLR/M (Loop-thru Output)
- 1 x XLR/M (Mix Output)
- 1 x locking IEC power connector
- AC Power Input: Universal power supply 100 – 240 VAC, 50 – 60 Hz
- AC Power Consumption 1/8th Power: 100 VAC, 2.1 A / 120 VAC, 1.9 A / 240 VAC, 1.1 A
- Enclosure Details: Impact Resistant ABS
- Attachment Points: 2 x M10 threaded inserts plus Pull-Back
- Color: Black (RAL 9011)
- Grille:18 Gauge powered coated steel, internal cloth lining
- Dimensions (HxWxD): 519 x 320 x 300 mm
- Net Weight:14,5 kg

5,925.00 kr Add
QSC K12.2 Professionel aktiv højttaler 2000W

QSC K12.2 Professionel aktiv højttaler 2000W

QSC K12.2 Professionel aktiv højttaler 2000W

The QSC K.2 Series represents the best-in class loudspeaker for today’s demanding audio professionals. The perfect combination of elegant design, superior audio performance, high functionality, simple and intuitive operation, and genuine QSC reliability, K.2 delivers extraordinary results for users in both portable and installed applications.

- 2000 Watt Class-D amplifier module
- Factory Presets and savable/recallable scenes for commonly-used applications
- Multi-function digital display for control and selection of loudspeaker functions including cross-over, EQ, delay and frequency contour
- Intrinsic Correction™ tuning and loudspeaker management
- DMT™ (Directivity Matched Transition) design provides excellent power response and consistent performance across the listening area
- Refined, professional appearance looks great in any application
- Rugged ABS enclosure for long life and lasting durability
- Deployment in either main PA or floor monitor position
- Dual pole cup mounts (standard and 7.5 degree down-tilt)
- M10 fittings for flown applications
- Optional security panel prevents unauthorized tampering of controls
- Complete EASE and CAD information available online
- 6-Year Warranty with registration

Specs:
- Multi-purpose, 2-way powered loudspeaker
- LF Transducer: 12" (305 mm), cone
- HF Transducer: 1.4" (35.6 mm) titanium diaphragm compression driver
- Frequency Response (-6 dB): 50 Hz - 20 kHz
- Frequency Range (-10 dB): 45 Hz - 20 kHz
- Nominal Coverage Angle: 75° Axisymetric
- Maximum Rated SPL1: 132 dB @1 M peak, 126 dB @ 1 M continuous
- Amplifier: Class D
- Peak: 1800 W (LF), 225 W (HF)
- Cooling: Low-noise, variable speed fan
- Controls: Power, 3 x Level, Rotary encoder (push), 2 x selection buttons
- Monochrome LCD Display 1.75" x 1" (45 mm x 25.4 mm) Connectors:
- 2 x locking XLR/F ¼" combo (Mic/Line Input and Hi-Z/Line Input
- 1 x 3.5 mm TRS (Stereo Input)
- 2 x XLR/M (Loop-thru Output)
- 1 x XLR/M (Mix Output)
- 1 x locking IEC power connector
- AC Power Input: Universal power supply 100 – 240 VAC, 50 – 60 Hz
- AC Power Consumption 1/8th Power: 100 VAC, 2.1 A / 120 VAC, 1.9 A / 240 VAC, 1.1 A
- Enclosure Details: Impact Resistant ABS
- Attachment Points: 2 x M10 threaded inserts plus Pull-Back
- Color: Black (RAL 9011)
- Grille:18 Gauge powered coated steel, internal cloth lining
- Dimensions (HxWxD): 602 x 356 x 350 mm
- Net Weight: 17.7 kg

6,650.00 kr Add
QSC K8.2 Professionel aktiv højttaler 2000W

QSC K8.2 Professionel aktiv højttaler 2000W

QSC K8.2 Professionel aktiv højttaler 2000W

The QSC K.2 Series represents the best-in class loudspeaker for today’s demanding audio professionals. The perfect combination of elegant design, superior audio performance, high functionality, simple and intuitive operation, and genuine QSC reliability, K.2 delivers extraordinary results for users in both portable and installed applications.

- 2000 Watt Class-D amplifier module
- Factory Presets and savable/recallable scenes for commonly-used applications
- Multi-function digital display for control and selection of loudspeaker functions including cross-over, EQ, delay and frequency contour
- Intrinsic Correction™ tuning and loudspeaker management
- DMT™ (Directivity Matched Transition) design provides excellent power response and consistent performance across the listening area
- Refined, professional appearance looks great in any application
- Rugged ABS enclosure for long life and lasting durability
- Deployment in either main PA or floor monitor position
- Dual pole cup mounts (standard and 7.5 degree down-tilt)
- M10 fittings for flown applications
- Optional security panel prevents unauthorized tampering of controls
- Complete EASE and CAD information available online
- 6-Year Warranty with registration

Specifikationer:
- Multi-purpose, 2-way powered loudspeaker
- LF Transducer: 8" (203 mm), cone
- HF Transducer: 1.4" (35.6 mm) titanium diaphragm compression driver
- Frequency Response (-6 dB): 59 Hz - 20 kHz
- Frequency Range (-10 dB): 55 Hz - 20 kHz
- Nominal Coverage Angle: 105° Axisymetric
- Maximum Rated SPL1: 128 dB @1 M, peak 122 dB @ 1 M, continuous
- Amplifier: Class D
- Peak: 1800 W (LF), 225 W (HF)
- Cooling: Low-noise, variable speed fan
- Controls: Power, 3 x Level, Rotary encoder (push), 2 x selection buttons
- Monochrome LCD Display 1.75" x 1" (45 mm x 25.4 mm) Connectors:
- 2 x locking XLR/F ¼" combo (Mic/Line Input and Hi-Z/Line Input
- 1 x 3.5 mm TRS (Stereo Input)
- 2 x XLR/M (Loop-thru Output)
- 1 x XLR/M (Mix Output)
- 1 x locking IEC power connector
- AC Power Input: Universal power supply 100 – 240 VAC, 50 – 60 Hz
- AC Power Consumption 1/8th Power: 100 VAC, 2.1 A / 120 VAC, 1.9 A / 240 VAC, 1.1 A
- Enclosure Details: Impact Resistant ABS
- Attachment Points: 2 x M10 threaded inserts plus Pull-Back
- Color: Black (RAL 9011)
- Grille:18 Gauge powered coated steel, internal cloth lining
- Dimensions (HxWxD): 449 x 280 x 269 mm
- Net Weight:12.2 kg

5,600.00 kr Add
QSC TM16 Touchmix Digital mixer

QSC TM16 Touchmix Digital mixer

QSC TM16 Touchmix Digital mixer

Its 22 mixing channels (16 Mic/Line, 4 Line, Stereo USB) and 12 outputs offer ample signal management flexibility while advanced features such as class-A microphone preamps, Anti-Feedback and Room Tuning Wizards, real-time analyzer (RTA) and 20-channel direct-to-external-drive recording make it equally competent as both a professional live sound or recording tool.

The touch-and-turn interface of TouchMix allows for tactile control over fader and mixer parameters while also providing a hardware connection to the mixer. Mixer functions and displays are duplicated via iOS® or Android devices over Wi-Fi, providing both portable, wireless connectivity as well as additional control of mixer functionality.

The TouchMix-16 comes complete with USB Wi-Fi adapter and carrying case.

- Capacitive touchscreen offers a wealth of on-screen information while also providing confident hands-on control
- 120 presets provide real-world live sound settings for commonly-used instruments and microphones
- Simple and Advanced modes offer either basic or comprehensive controls
- Anti-Feedback and Room Tuning Wizards simplify complex equalization tasks•Real-time analyzer (RTA) provides instantaneous display of channel tonal balance and room response

- 10 Aux outputs provide ample monitor configuration options
- 22-channel direct-to-hard drive record/playback — capture and recall performances without the need for an external computer
- MP3 playback direct from USB
- On-board multi-language user guide
- Download future upgrades directly from the Internet

- Inputs: 22 total
- 4 XLR/TRS combo
- 12 XLR
- 2 stereo 1/4" TRS
- USB stereo playback

Outputs:
- Two main XLR line-level
- Six aux XLR line-level
- Two stereo aux. TRS (line-level or in-ear monitor, 16Ω min. impedence)
- One stereo monitor TRS (line-level or headphone, 16Ω min. impedance)
- One stereo cue, TRS, (line or headphone, 16Ω min. impedance)
- 4 multi effectprocessors: including reverb, echo, delay, chorus. 50 factory, 50 user presets, 1 pitch correct (assignable to any mono input channel)
- Complete DSP processing for all in/outputs
- 8 DCA groups (with mute), 8 Mute groups
- USB-WiFi adapter included (for iPad control)
- Multi-channel (22 tracks) rec/playback direct to USB 3.0 FAT 32
- Soft carrying case
- External Control: Android, iOS TouchMix app for iPad, iPad mini, iPad Air. - - - Control via Wi-Fi provides access to all mixer functions.
- Screen: 6.1” × 3.5” (156 mm × 90 mm) color TFT, touch sensing display
- Dimensions (HWD): 58 mm x 360 mm x 291 mm 2.3” x 14.2” x 11.5”
- Weight: 5.9 lb (2.98 kg)

10,895.00 kr Add
QSC TM30pro Touchmix Digital mixer

QSC TM30pro Touchmix Digital mixer

QSC TM30pro Touchmix Digital mixer

The TouchMix-30 Pro has the features and functionality that will satisfy the most demanding professional while also providing an intuitive workflow that delivers great results, quickly and easily, to users at every level of experience.

Perfect for production professionals, musicians and bands as well as live performance venues, its 32 mixing channels (24 Mic/Line, 6 Line, Stereo USB) and 16 outputs offer tremendous signal management flexibility for a wide range of applications.

- 32 inputs (24 mic/line, 6 line, 1 stereo USB playback).
- 10" (diagonal) color, multi-touch capacitive touch screen graphical user interface combined with hardware controls for fast and intuitive operation.
- Intuitive Work Flow — simple for the novice; fast for the professional.
- Over 120 Live Sound Channel Presets for a wide range of sources and instruments.
- Anti-Feedback; Room Tuning; Gain and Effects Wizards.
- Comprehensive, on-board Info System guides and assists users.
- 4-Band full Parametric EQ, variable High and Low-Pass Filters on all input channels.
- Gate, Compressor and Delay on all input channels.
- All outputs feature 1/3 Octave Graphic Equalization and 6-band Parametric EQ plus Limiters, Delay and 12-band Notch Filters.
- Eight Sub-Groups with 6-band full Parametric EQ, variable High- and Low-Pass Filters and Limiter. May be linked for stereo.
- 8 DCA groups; 8 Mute groups; 8 subgroups.
- Two built-in Real Time Analyzers (RTA).
- Six professional quality Stereo DSP Processors plus a Pitch Corrector.
- Touch-and-Route Patch Matrix for easy “multing” of inputs to mixer channels.
- Copy and Paste function easily duplicates mixes, channels, EQ, dynamics and more.
- Monitor mixes: 14 mono mixes, may be paired for stereo. Two pairs of the Auxes can drive wired in-ear monitors (IEM)directly.
- Records and plays back multi-track wave files (32 tracks) using external hard drive. Capable of recording all input channels plus a user-selected stereo output pair.
- Interfaces with most DAW software running on Mac® computers.
- Remote control via mobile devices over Wi-Fi. (Wi-Fi dongel not included), Router is recommended due to large data transmissions
- Rack-mountable with optional Accessory Kit.
- 19 cm x 42.9 cm x 46 cm
- 7,9kg

15,595.00 kr Add
QSC TM8 Touchmix Digital mixer

QSC TM8 Touchmix Digital mixer

QSC TM8 Touchmix Digital mixer

TouchMix is quite simply the most powerful, compact mixer ever created. It offers the features, capabilities and sound quality of the world's most esteemed large format consoles in a highly compact and portable package that's small enough to be carry-on luggage. Perfect for solo and duo musicians, small bands and AV production professionals, the TouchMix-8 goes "Beyond Mixing" by offering Wizards, Presets and other beneficial tools that help both seasoned audio professionals and novices alike get great results quickly and easily.

Its 14 mixing channels (8 Mic/Line, 4 Line, Stereo USB) and 6 outputs offer ample signal management flexibility while advanced features such as class-A microphone preamps, Anti-Feedback and Room Tuning Wizards, real-time analyzer (RTA) and 14-channel direct-to-external-drive recording make it equally competent as both a professional live sound or recording tool.

The touch-and-turn interface of TouchMix allows for tactile control over fader and mixer parameters while also providing a hardware connection to the mixer. Mixer functions and displays are duplicated via iOS® or Android devices over Wi-Fi, providing both portable, wireless connectivity as well as additional control of mixer functionality.

- The TouchMix-8 comes complete with USB Wi-Fi adapter and carrying case.
- Capacitive touchscreen offers a wealth of on-screen information while also providing confident hands-on control
- 120 presets provide real-world live sound settings for commonly-used instruments and microphones
- Simple and Advanced modes offer either basic or comprehensive controls
- Anti-Feedback and Room Tuning Wizards simplify complex equalization tasks•Real-time analyzer (RTA) provides instantaneous display of channel tonal balance and room response
- 4 Aux outputs provide ample monitor configuration options
- 14-channel direct-to-hard drive record/playback — capture and recall performances without the need for an external computer
- MP3 playback direct from USB
- On-board multi-language user guide
- Download future upgrades directly from the Internet
- Inputs: 14 total
- Four XLR/TRS combo
- Four XLR
- Two stereo 1/4" TRS
- Stereo USB

Outputs:
- Two main XLR line-level
- Four aux XLR line-level
- One stereo TRS (line-level or in-ear monitor, 16Ω min. impedance)
- One stereo cue, TRS, (line or headphone, 16Ω min. impedance)
- 4 multi effectprocessors: including reverb, echo, delay, chorus. 50 factory, 50 user presets
- 1 pitch correct (assignable to any mono input channel)
- Complete DSP processing for all in/outputs
- 8 DCA groups (with mute), 8 Mute groups
- USB-WiFi adapter included (for iPad control)
- Multi-channel (14 tracks) rec/playback direct to USB 3.0 FAT 32
- Soft carrying case
- External Control: Android, iOS TouchMix app for iPad, iPad mini, iPad Air.
- Control via Wi-Fi provides access to all mixer functions. 6.1" × 3.5" (156 mm × 90 mm) color TFT, touch sensing display
- Dimensions (HWD): 56 mm x 333 mm x 245 mm
- Weight: 4.3 lb (1.95 kg)

7,795.00 kr Add
Samson AURO-D12

Samson AURO-D12

Samson AURO-D12

Auro D12 er en passiv fullrangehøjttaler med en let konstruktion og kan også anvendes som gulvmonitor i to forskellige vinkler.

12"och 34mm kompressionsdriver

400 watt RMS

8 Ohm

1 Speakon® och 1 parallell ¼"-telekontakt

35mm stativkopp

356x275x546mm

1,695.00 kr Add
Samson AuroX15D 1000W aktiv monitor

Samson AuroX15D 1000W aktiv monitor

Samson AuroX15D 1000W aktiv monitor



Compact, lightweight Class D 2-way active loudspeakers
1,000 watts of output power
15" extended range low frequency driver
1.34" (34mm) titanium compression driver
Samson's R.A.M.P. (Reactive Alignment/Maximum Protection) DSP technology
Master Volume control with peak indicator
Two XLR-1/4" combo input channels with independent volume controls
3-position EQ and HPF presets
XLR Link output allows expanded sound to additional speakers
Solid polypropylene enclosure with impact resistant design
Full metal grill protects all speaker components
Two large ergonomic carry handles
Integrated 1 3/8" speaker stand mount
Dual-angle floor monitor positioning options




http://www.samsontech.com/samson/products/pa-cabinets/auro/aurox15d/

3,595.00 kr Add
Soldano Avenger Model A100

Soldano Avenger Model A100

Soldano Avenger Brugt!
Model A100
100 watt AVENGER
Power: 100 watts Single Channel Head
Weight: 40 lbs.
Size: 9.5″H x 25″W x 9.5″D
Preamp Tubes: Four 12AX7 / ECC83
Power Tubes: Four 5881 / 6L6

14,900.00 kr Add
SOLGT - Ampeg SVT VR

SOLGT - Ampeg SVT VR

Ampeg SVT VR

Preamp: Tube (3 x 12AX7, 2 x 12AU7)
Driver Tube(s): 1 x 12AX7, 2 x 12AU7 Power Amp: Tube (6 x 6550)
RMS Power Output: 300-Watts @ 2 ohms
RMS Power Output: 300-Watts @ 4 ohms
Tone Controls: Bass, Mid, Treble
Mid Tone Control: 3-Position Rocker Switch
Ultra Low/High Boosts: Yes
Speaker Connections: Neutrik Speakon® and 1/4"
Balanced Line Out: Yes (Transformer)
Preamp Out/Power Amp In: Yes
Dimensions (W x H x D inches): 24 x 11.5 x 12.75
Weight: 38.5kg

15,999.00 kr Add
SOLGT - BluGuitar AMP1 -100w forstærker top

SOLGT - BluGuitar AMP1 -100w forstærker top

BluGuitar AMP1 -100w forstærker top

-Kraft og karakteristika fra alle de lækre vintage forstærkere i en samlet pakke..

Amp indstillinger: Clean-Vintage-Classic-Modern
Boost og Reverb
Højttalertilslutning: 1 x 8 Ω, 1 x 16 Ω
Dimensioner: 245 x 68 x 192 mm

Læs mere:
http://www.bluguitar.com/english/AMP1.html

4,895.00 kr Add
SOLGT - Dynacord powermate 1000

SOLGT - Dynacord powermate 1000

Dynacord powermate 1000 Brugt

2x500 Wat

14 Kanaler

8,900.00 kr Add
SOLGT - Fender 63 Reverb Top

SOLGT - Fender 63 Reverb Top

Fender® '63 Tube Reverb Tank Brown/Wheat Brugt!

Type nr. 263
Reissue 1994

‘63 Fender Reverb top panel functions
A. POWER SWITCH-Turns the AC power ON and OFF. When the switch is in the OFF position, the unit is completely shut down.

B. FUSE-The fuse is in the AC supply of the amplifier and will help to protect the amplifier and the operator in the event of an electrical fault. If a fuse blows, it should only be replaced with a fuse in accordance with the listing at the fuse holder. If an amplifier repeatedly blows fuses, it should be checked out by a qualified technician. UNDER NO CIRCUMSTANCES should a fuse of a different type, higher current rating, or a fuse bypass be used, as this could damage the equipment and present a serious safety hazard.

C. PILOT LIGHT-This lamp is illuminated when the power is on.

D. DWELL-Adjusts the amount of signal sent to the reverb pan. At low Dwell settings (two to four) the reverb sounds much like a guitar played into a large room. At high Dwell settings (above four) the reverb signal will start to sound more “springy” or ‘twangy”.

E. INPUT-A high impedance plug-in connection for instruments.

F. MIXER-The reverb “wet” signal and the ‘dry” signal are mixed together at this control. The mixer adjusts what percentage of the signal sent to the output jack is from the reverb pan circuit compared to the dry signal. Higher settings equal more reverb.

G. TONE-This control affects only the “wet’ portion of the signal and acts much like the treble control on a guitar amplifier. Turning the Tone control up allows more high frequencies through from the reverb to the mixer control.

H. OUTPUT-This is the output jack that is used to send the signal from the reverb unit to the amplifier.

Using your ‘63 Fender Reverb
The ‘63 Fender Reverb is designed to go between a low level instrument (such as a guitar) and a high input impedance amplifier (such as any Fender tube amplifier or the high sensitivity input on any Fender solid-state amplifier). It should be used only with the clean channel of the amplifier as distorted reverb sounds very unnatural. If you want to use the ‘63 Fender Reverb with high gain or distortion, you may use either a distortion pedal inserted before the Reverb Unit or connect the Reverb Unit in the effects loop of the amplifier and use the high gain/distortion channel of the amplifier. However, since most of the sonic benefits of the ‘63 Fender Reverb result from the fact that the reverb signal is generated before the tone controls and preamp gain circuitry of the amplifier, we do not recommend using it in the effects loop.

3,995.00 kr Add
SOLGT - Peavey PA Anlæg

SOLGT - Peavey PA Anlæg

Peavey PA Anlæg

Peavey Mixer XR600B
1stk.Peavey Højttaler 15" med Horn
model CDRBY 11SHE EHC

4,500.00 kr Add
SOLGT - Proel Flash 12A Højttaler

SOLGT - Proel Flash 12A Højttaler

System type : 2-way processed active enclosure Amplifier Continuous Power : 200 W+50 W bi-amp Input Impedance : LINE: 20 kohm balanced, 10 kohm unbalanced MIC: 2 kohm balanced, 1 kohm unbalanced Frequency response : 50 Hz - 20 kHz Sensitivity : 98 dB @ 1 W/1 m Input Sensitivity : LINE: 0 dBu / 0.775 V MIC: max -35 dBu Low Frequency Device : 12'' woofer High Frequency Device : 1'' compression driver Titanium diaphragm Crossover Frequency : 2000 Hz Low frequency equalizer : 100 Hz +6 dB, -6 dB shelving High Frequency Proel Flash 12A Højttaler
Equalizer : 8 kHz +6 dB, -6 dB shelving Angolar coverage : 90° H x 60° V Monitor Taper : 42° Power Supply : 230 VAC 50Hz or 117 VAC 60 Hz Maximum Power Consumption : 390 VA Cooling : Natural convection (safety protection 65°) Connectors : IN: combo, XLR F LINK: XLR M Construction : injection reinforced hi-density polypropylene Mounting Pole : 1 x bottom Flying System : 4 x M10 - top, bottom Weight : 20 kg(44.100lb ) Dimensions (W x H x D) : 39 x 63 x 36 cm Controls : mic level, line level, low eq., hi eq., gnd lift

4,495.00 kr Add
SOLGT - Proel Flash 8A Højttaler

SOLGT - Proel Flash 8A Højttaler

Proel Flash 8A Højttaler DEMO!
System type : 2-way processed active enclosure
Amplifier Continuous Power : 180 W+50 W bi-amp
Input Impedance : LINE: 20 kohm balanced, 10 kohm unbalanced
MIC: 2 kohm balanced, 1 kohm unbalanced
Frequency response : 60 Hz - 20 kHz
Input Sensitivity : LINE: 0 dBu / 0.775 V
MIC: max -35 dBu
Maximum (peak) Output : 122 dB @ 1m
Low Frequency Device : 8'' woofer
High Frequency Device : 1'' compression driver Titanium diaphragm
Crossover Frequency : 3000 Hz
Low frequency equalizer : 100 Hz +6 dB, -6 dB shelving
High Frequency Equalizer : 8 kHz +6 dB, -6 dB shelving
Angolar coverage : 90° H x 60° V
Monitor Taper : 42°
Power Supply : 230 VAC 50Hz or 117 VAC 60 Hz
Maximum Power Consumption : 200 VA
Cooling : Natural convection (safety protection 65°)
Connectors : IN: combo, XLR F
Mix out: XLR M
Construction : injection reinforced hi-density polypropylene
Mounting Pole : 1 x bottom
Flying System : 4 x M8 - top, bottom
Weight : 10 kg(22.050lb )
Dimensions (W x H x D) : 27 x 42 x 26 cm

DKK. 3.199,00 Vejl.


2,600.00 kr Add
SOLGT - Yamaha Stagepas 600i

SOLGT - Yamaha Stagepas 600i

Yamaha Stagepas 600i

1 stk Stagepas 600 powermixer
680 watt dynamisk, 560 watt (280 + 280) continuous stereo Class D forstærker
8 kanaler, 4 mikrofon/line + 6 mono/3 stereo line
USB Audio ind: iPod/iPhone med oplader
Indbygget SPX digital rumklang
3 bånds equalizer
1-knap master EQ, for hurtig optimering af mix i forhold til opgave
Monitor og Subwoofer udgange
Mulighed for fodpedal tilslutning til styring af rumklang
Dimensioner 348 x 197 x 135 mm

2 stk Stagepas højttalere

2 vejs bas-reflex fullrange
10" + 1,4" kompressions horn
Bærehåndtag
Standard stativ montering 35 mm med StageLok sikring
Gulvmonitor vinklet kabinet
Dimensioner 335 x 545 x 319 mm
Samlet vægt på mixer og højttalere 25.4 kg

6,849.00 kr Add
SOLGT Gibson Les Paul 8C Reference Monitor

SOLGT Gibson Les Paul 8C Reference Monitor

Gibson Les Paul 8C Reference Monitor
DKK.pr.stk.8.495,00

Specifications

System
Configuration: 2-Way
Type: Active Monitor, bi-amped

Drivers
Tweeter: 1" Diamond-like carbon-coated titanium Tweeter
Woofer: 8" non-woven carbon Woofer

Technical Specification
Freq. Range (-10dB): 37Hz - 47kHz
Crossover Freq. (Acoustic): 2.7kHz
Max Peak SPL (Limiter Engaged) per pair: 118 dB
System Power (Hi+Lo Amp combined): 247 Watts
Amplifier Distortion: <0.2%THD+N 20Hz - 20kHz (-3dB Max Power)
SNR (Signal to Noise Ratio): >92dB

Adjustments
Bass Level Adjust Switch: Bass Level Adjust (-4dB, -2dB, -1dB, 0, +1dB, +2dB, +4dB)
Treble Level Adjust Switch: Treble Level Adjust (-4dB, -2dB, -1dB, 0, +1dB, +2dB, +4dB)

Enclosure
Input connectors: RCA, Balanced TRS, Balanced XLR
Dimensions (H x W x D): 472mm x 306mm x 350mm / 18.58" x 12.05" x 13.78"
Weight: 13.8kg / 30.5 lbs.

8,495.00 kr Add
SOLGT MesaBoogie Bass Strategy Eight:88

SOLGT MesaBoogie Bass Strategy Eight:88

MesaBoogie Bass Strategy Eight:88
High End bas rørtop fra MesaBoogie
465Watt
8x KT88 rør
3x 12AX7 rør
Full/Half/Low Power switch
Silent Rec Output

læs mere: http://www.mesaboogie.com/amplifiers/bass/prodigy--strategy-tube-bass-amp-series/bass-strategy-eight-88/index.html

25,900.00 kr Add
SOLGT SWR Bass 350 Top

SOLGT SWR Bass 350 Top

SWR Bass 350 Top
All voltages and watts are “RMS.”
All measurements were taken with tone controls set flat,
Aural Enhancer at minimum.
All measurements were taken with a line voltage of 120VAC.
All noise specifications are
POWER (minimum) 450 Watts @ 2 ohms 350 Watts @ 4 ohms 240 Watts @ 8 ohms
FREQUENCY RESPONSE (Power Amplifier) –3dB @ 20 Hz and 40 kHz SENSITIVITY (full output under clipping, 8 ohms load, 100 Hz) Passive Input Jack: 38 millivolts Active Input Jack: 60 millivolts Power Amplifier (Effects Return Jack “in”): 5 volts
INPUT IMPEDANCE Passive/Active Input: 800k Ohms Active Input: 60k Ohms Effects Return: 27k Ohms
OUTPUT IMPEDANCE Effects Send: 100 Ohms Tuner Send: 100 Ohms Crossover Low and High Outs: 100 Ohms XLR Balanced Out: .750 Ohms
SIGNAL TO NOISE RATIO: –72 dB (<10 millivolts typical)
EQUIVALENT INPUT NOISE: 9 microvolts
DIMENSIONS: 19" W x 3.5" H x 10.125" D
WEIGHT: 21 lbs.

5,900.00 kr Add
SOLGT Yamaha EMX5014 mixer

SOLGT Yamaha EMX5014 mixer

Yamaha EMX5014 mixer

Multimode forstærker på 2x500 watt i 4 ohm.
14 indgange inkl. 8 mik/line kanaler, heraf 2 også stereo kanaler, samt 2 stereo kanaler.
3 bånds EQ med mid sweep på kanal 1-8.
9 bånds grafisk master EQ
Yamaha SPX 24 bit digitale multieffekt med 16 programmer.
Kompressor på kanal 1-6.
Insert på kanal 1-6.
2 Aux sends.
Yamaha speaker processor.
PFL og AFL monitoring
Standby kontakt.
Mulighed for 19" rackmontering.


5,999.00 kr Add
VOX Night Train NT15H

VOX Night Train NT15H

VOX Night Train NT15H
2 x 12AX7 preamp-rør og 2 x EL84 sluttrinsrør
"BRIGHT" eller "THICK" mode-switch til EQ og Gain variationer
"Dual-power tube mode" for 15 watt (Pentode Power) eller 7.5 Watt mode (Triode Tone)
Polstret bæretaske medfølger
Vægt 7.7 kg.

3,795.00 kr Add
 
Back to content | Back to main menu